RS/M Series
RS/M series is widely used in middle size factory, combing blower and hydrodynamic design.
Its output rate from 70 to 6300 kW/h, choosen by requirement.
RS/M series could adjust the flame intensity and output rate as customer's requirement.
Compared with one stage and two stage, this type could do more accurate control with output and flame intensity.
Recommend to those who need accuracy.
※Burner design standard is according to EU legislation EN676 Class I or Class II, it's not so strict than Class III
Basic information
Model :RS 34-610/M MZ
Control method:Mechanical Proportional control
Output rate:70-6300 kW
Voltage:refer to below table
Fuel:Natural Gas, Liquid Petroleum Gas(suggest to install LPG kit extra)
NOx emission value:≦ 65 ppm (130 mg/kWh)
Model | RS 34/M MZ | RS 44/M MZ | RS 50/M MZ | RS 64/M MZ | RS 70/M | ||
Control method | Mode | Mechanical Proportional Control | |||||
Output rate | kW | 45-390- | 80-550 | 80-630 | 150-850 | 150-930 | |
Voltage | Ph/Hz/V | ❶ | ❶ | ❸ | ❷ | ❷ | ❷ |
Motor consumption | kW | 0.3 | 0.42 | 0.45 | 0.65 | 1.1 | 1.1 |
Noise level | dB(A) | 68 | 70 | 72 | 76 | 75 | |
NOx value | ppm | ≦ 65 |
❶ 1 / 50-60 / 220-230~ (±10%)
❷ 3 / 50 / 230-400~ (±10%)
❸ 3 / 50-60 / 220-400~ (±10%)
Model | RS 100/M | RS 130/M | RS 150/M | RS 190/M | RS 250/M | |
Control method | Mode | Mechanical Proportional Control | ||||
Output rate | kW | 150-1340 | 240-1600 | 300-1850 | 470-2290 | 600-2650 |
Voltage | Ph/Hz/V | ❷ | ❷ | ❹ ❺ | ❷ | ❹ ❺ |
Motor consumption | kW | 1.5 | 2.2 | 3.0 | 4.5 | 5.5 |
Noise level | dB(A) | 77 | 78.5 | 83.1 | 83.1 | 83 |
NOx value | ppm | ≦ 65 |
❷ (05) 3 / 50 / 230-400~ (±10%)
❹ (07) 3 / 50 / 400~ (±10%)
❺ (08) 3 / 50 / 230~ (±10%)
Model | RS 310/M MZ | RS 410/M MZ | RS 510/M MZ | RS 610/M MZ | |
Control method | Mode | Mechanical Proportional Control | |||
Output rate | kW | 600-3900 | 800-4900 | 802-5520 | 820-6300 |
Voltage | Ph/Hz/V | 3N / 50 / 400 (±10%) | |||
Motor consumption | kW | 7.5 | 9.2 | 12 | 15 |
Noise level | dB(A) | 78 | 80 | 82.5 | 85 |
NOx value | ppm | ≤ 60 |